Auxiliary LED Lights - Nova

LET THERE BE LIGHT! MOTORBIKE AUXILIARY HEADLIGHTS LED NOVA

With the Nova LED auxiliary headlight set from HEPCO & BECKER, you get everything you need to improve the visibility, safety, and appearance of your motorcycle. The powerful LED auxiliary headlights provide improved illumination of the road while adding a stylish look to your bike.

The complete set includes 2 LED auxiliary headlights, a handlebar switch, cable set, universal mounting clamps with reduction sleeves, installation instructions, and a tool set, making installation and operation convenient.

The Nova LED auxiliary headlights feature high-power LEDs with two switching levels and deliver excellent illumination for enhanced visibility in road traffic.

Features & Specifications

• High-power LEDs with two switching levels
• Light output: 2,500 lm
• Color temperature: 4,350K / 5,500K
• Voltage: 12V
• Power consumption: 25W per headlight
• ECE-tested and approved — no individual approval is required, subject to country-specific installation regulations
• Improved lighting conditions and visibility in road traffic
• Universal mounting on engine or tank protection brackets
• Available mounting options:
  • Ø18–25 mm tube
  • Ø25–32 mm tube
• Can be mounted upright or suspended
• Complete headlight set includes:
  • 2 × LED auxiliary headlights
  • 1 × handlebar switch
  • 1 × cable set
  • 2 × mounting clamps with reduction sleeves
  • 1 × instruction manual
  • 1 × tool set
• Connection directly via the battery, with no connection to the motorcycle's wiring harness required
• Special control unit with automatic voltage control prevents unintended operation
• IP67 waterproof and dustproof rating
• Auxiliary headlights can be conveniently switched via the handlebar-mounted switch

Important Information

The lights can be switched on approximately 5–15 seconds after starting the engine. A minimum voltage of 13.1V must be supplied to the wiring harness control unit before the circuit is enabled. On older motorcycles, this may require briefly increasing the engine speed.

The lights must normally be switched off manually using the handlebar switch. After the engine is switched off, the NOVA LEDs remain illuminated until the voltage drops below 11.8V. Once this voltage threshold is reached, the control unit automatically switches the lights off.

When switching the lights on again, allow the control unit's dwell time to elapse. The system will then check for the required 13.1V activation voltage again.

Mounting Variant: Choose the appropriate version according to your motorcycle's protection-bar/tube diameter: Ø18–25 mm or Ø25–32 mm.